Model
DT-V20L3G
Type

Multi format LCD monitor
Screen Size

Type 20 wide format
Aspect Ratio

16:10
LCD Panel

20" wide,active matrix TFT
Effective Screen Size (W x H)

433.4 x 270.9 mm (17-1/8" x 10-3/4")
Pixels

1680 x 1050
Display Colors

16.77 million
Viewing Angle
Horizontal
178°

Vertical
178°
Brightness

470 cd/m2
Contrast Ratio

700: 1
Response Time (G to G)

6 ms (TYP)
Horizontal/Vertical
Horizontal
31.469 kHz to 75.000 kHz
Frequency (PC signals)
Vertical
48 Hz - 65 Hz


Depending on the signal within the range of these


frequencies, some signals may not be displayable in which


case, "Out of range " is shown.
Applicable Standard

3G SDI (Ready) : SMPTE424M/SMPTE425M


DUAL LINK HD SDI: SMPTE372M


HD SDI: BTA S-004C, SMPTE292M


SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525


EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Audio Output

Internal speaker: 1.0 W + 1.0 W
Operating Conditions
Operating temperature
5°C to 35°C (41°F to 95°F)

Operating humidity
20% to 80% (non condensing)

Storage temperature
-20°C to 60°C
Power Requirements

AC 120/220-240 V, 50/60 Hz
Rated Current

1.00 A (AC 120 V) / 0.60 A (AC 220 – 240 V)
Dimensions (WxHxD)
With desktop stand
477 x 394.6 x 243 mm (18-7/8" x 15-5/8" x 9-5/8")
(excluding protrusions)
Without stand
477 x 354 x 99 mm (18-7/8" x 14" x 4")
Weight
Including stand
10.6 kg (23.3 lbs.)

Excluding stand
7.7 kg (16.9 lbs.)
Provided Accessories

AC power cord, power cord holder x 1,


screw x 2 ( for power cord holder)
INPUT/OUTPUT TERMINALS
Video
VIDEO (INPUT 1)
Input/output of composite signal:

2 line, BNC connector x 4, 1 V(p-p), 75 ?
VIDEO (INPUT 2)
* The input (IN) and output (OUT) terminals are bridgeconnected (auto termination).
DVI-D (HDCP)
DVI-D signal input (compatible with HDCP):

DVI-D connector x 1 (compatible with DDC2B)
COMPO./RGB
Input/output of analog component signal/analog RGB signal:
(GY, B/PB/B-Y, R/PR/R-Y)
1 line, BNC connector x 6

G/Y: 1 V(p-p), 75 ? (including sync signal)

B/PB/B-Y, R/PR/R-Y: 0.7 V(p-p), 75 ?

* The input (IN) and output (OUT) terminals are bridgeconnected (auto termination)
EXT.SYNC (CS)
Input/output of composite sync signal: 1 line, BNC connector x 2,

0.3 V(p-p) – 4 V(p-p), 75 ? (tri-level sync,

negative polarity sync (bi-level), and BB) (including no video signal)

* The input (IN) and output (OUT) terminals are bridgeconnected (auto termination)
Audio
E. AUDIO HD/SD SDI (IN 1)
Digital signal input (compatible with EMBEDDED AUDIO/
E. AUDIO HD/SD SDI (IN 2)
DUAL LINK signals): auto detection, 2 line, BNC connector x 2
E. AUDIO HD/SD SDI
Digital signal output (compatible with EMBEDDED AUDIO signals):
(SWITCHED OUT)
1 line switched out, BNC connector x 1
AUDIO ASSIGN (IN1)
Analog audio signal input:
AUDIO ASSIGN (IN2)
2 line, RCA connector x 4, 500 mV (rms), high impedance
AUDIO ASSIGN (MONITOR OUT)
Analog audio signal output: 1 line, RCA connector x 2, 500 mV (rms)
External Control
REMOTE (MAKE/TRIGGER)
RJ-45 x1 (8-pin)
REMOTE (RS-485)
RJ-45 x2 (IN/OUT) (8-pin)
REMOTE (RS-232C)
D-sub(9-pin) x1